← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9120.b · 生成模型:GPT-6

抬脚会改变支撑多边形

理解等级:中级

四足机器人一脚离地后,原四点支撑变为三点,原本安全的质心投影可能落到新三角形外。规划步态时应同步安排接触次序和重心移动,不能只给每条腿独立轨迹便假设整体站稳。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      A fundamental difference between locomotion mechanisms is whether they are statically or dynamically stable. A statically stable mechanism will not fall even when not actuated (figure 2.2, left). A dynamically stable robot instead requires constant actuation to prevent it from falling. Technically, stability requires the robot to keep its center of mass to fall within the polygon spanned by its ground-contact points. For example, a

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第02章《运动操纵及其表示》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_2.xhtml) - 结论依据:摘录中关于抬脚会改变支撑多边形的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:A fundamental difference between locomotion mechanisms is whether they are statically or dynamically stable. A statically stable mechanism will not fall even when not actuated (figure 2.2, left). A dynamically stable robot instead requires constant actuation to prevent it from falling. Technically, stability requires the robot to keep its center of mass to fall within the polygon spanned by its ground-contact points. For example, a