知识卡片
量程与动态范围是不同指标
量程区间由可测上下限确定,动态范围常比较最大不失真信号与最小可检测信号的比值。若用dB表示,还须明确功率比用10log、幅值比在相应条件用20log;不能只写以10为底的任意对数就视为完整定义。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 传感器
原书出处 · 1 处
- · 查看原书依据
Another important term to characterize sensors is its range, which is the difference between the upper and the lower limit of the quantity a sensor can measure. This differs from its dynamic range, which is the ratio between the highest and lowest value a sensor can measure. It is usually expressed on a logarithmic scale (to the basis 10), also known as “decibel.” The minimal
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第07章《传感器》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_7.xhtml)
- 结论依据:摘录中关于量程与动态范围是不同指标的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Another important term to characterize sensors is its range, which is the difference between the upper and the lower limit of the quantity a sensor can measure. This differs from its dynamic range, which is the ratio between the highest and lowest value a sensor can measure. It is usually expressed on a logarithmic scale (to the basis 10), also known as “decibel.” The minimal