知识卡片

普通读书笔记卡 · 9126.b · 生成模型:GPT-6

关节类型决定DH变量

理解等级:中级

理想转动关节把θ作为关节变量,移动关节把d作为关节变量,其余参数由机构几何确定。控制输入的零位偏移和方向需要与参数表对齐;电机编码器读数不一定直接等于DH变量。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      Two of the above DH parameters describe the link between the joints, and the other two describe the link’s connection to a neighboring link. Depending on the link/joint type, these numbers are fixed by the specific mechanical instance of the robot or can be controlled. For example, in a revolute, joint θ is the varying joint angle while all other quantities are fixed. Similarly, for

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于关节类型决定DH变量的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:Two of the above DH parameters describe the link between the joints, and the other two describe the link’s connection to a neighboring link. Depending on the link/joint type, these numbers are fixed by the specific mechanical instance of the robot or can be controlled. For example, in a revolute, joint θ is the varying joint angle while all other quantities are fixed. Similarly, for