知识卡片
位姿必须附带参考坐标系
位置和朝向只有在说明参考系后才有确定含义。世界、底盘、关节与工具坐标系可同时存在,右手系是选定约定;yaw、pitch、roll和bank等名称在不同领域有差异,接口应明确轴、符号与旋转次序。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 运动操纵及其表示
原书出处 · 1 处
- · 查看原书依据
Every robot assumes a pose in the real world that can be described by its position (x, y, and z) and orientation (pitch, yaw, and roll) along the three major axes of a Cartesian coordinate system. Such a coordinate system is shown in figure 2.6. Note that the directions and orientations of the coordinate axes are arbitrary. This book uses the “right-hand rule,” which is
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第02章《运动操纵及其表示》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_2.xhtml)
- 结论依据:摘录中关于位姿必须附带参考坐标系的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Every robot assumes a pose in the real world that can be described by its position (x, y, and z) and orientation (pitch, yaw, and roll) along the three major axes of a Cartesian coordinate system. Such a coordinate system is shown in figure 2.6. Note that the directions and orientations of the coordinate axes are arbitrary. This book uses the “right-hand rule,” which is