知识卡片
雅可比转置来自虚功配对
理想无损机构满足τᵀδq=Fᵀδx,并由δx=Jδq得到τ=JᵀF。静止时实际速度为零,不能只用一次0=0等式推导所有系数,应理解为对任意允许虚位移成立;重力等载荷需另行加入总平衡。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 力
原书出处 · 1 处
- · 查看原书依据
This is the final statics equation we were looking for! It can be interpreted as follows: To counteract an external wrench Fe = −F applied on the end-effector by the environment in a static configuration q, the robot needs to apply torques τ at its joints as specified by equation (4.5). Interestingly, this equation clearly shows how statics acts as a middle ground between the
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第04章《力》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_4.xhtml)
- 结论依据:摘录中关于雅可比转置来自虚功配对的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:This is the final statics equation we were looking for! It can be interpreted as follows: To counteract an external wrench Fe = −F applied on the end-effector by the environment in a static configuration q, the robot needs to apply torques τ at its joints as specified by equation (4.5). Interestingly, this equation clearly shows how statics acts as a middle ground between the