知识卡片

普通读书笔记卡 · 9197.b · 生成模型:GPT-6

倾斜插入利用接触导向对中

理解等级:中级

示例先倾斜并横移,让轴端低边接近估计孔中心,再沿插入方向接触,通过顺应和回正逐步对中。接触几何、夹持柔顺与公差影响效果,文中直径1厘米的经验分界不应当成普遍物理阈值。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      Tilt insertion is detailed in figure 14.3 and proceeds as follows: (a) Given a hole pose, the part is held vertically above the hole by a preset distance; (b) the gripper is then tilted about its local y-axis and translated horizontally in the global frame in the direction corresponding to the hand’s local x-axis; (c) this offset places the lowest part of the bottom edge

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第14章《操纵》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_14.xhtml) - 结论依据:摘录中关于倾斜插入利用接触导向对中的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:Tilt insertion is detailed in figure 14.3 and proceeds as follows: (a) Given a hole pose, the part is held vertically above the hole by a preset distance; (b) the gripper is then tilted about its local y-axis and translated horizontally in the global frame in the direction corresponding to the hand’s local x-axis; (c) this offset places the lowest part of the bottom edge