知识卡片
驱动额定值要覆盖峰值与热态
驱动选择需核对供电电压、连续与峰值电流、功率流及散热能力,堵转和快速变载可能超过平均负载。P=UI表示功率而不是能量;能量还需乘时间积分,标称最大电流也不代表无散热条件可长期承受。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 执行器
原书出处 · 1 处
- · 查看原书依据
The biggest challenge in selecting appropriate circuits for motor drivers is selecting a circuit that can not only accommodate the voltage (U) and current (I) requirements but can actually handle the overall energy (P = UI). Here, the first hurdle is to provide the desired supply voltage. As it is difficult to convert supply voltages without loss (in particular when the required current is large),
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第06章《执行器》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_6.xhtml)
- 结论依据:摘录中关于驱动额定值要覆盖峰值与热态的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:The biggest challenge in selecting appropriate circuits for motor drivers is selecting a circuit that can not only accommodate the voltage (U) and current (I) requirements but can actually handle the overall energy (P = UI). Here, the first hurdle is to provide the desired supply voltage. As it is difficult to convert supply voltages without loss (in particular when the required current is large),