知识卡片
局部连接必须符合平台运动约束
非完整车或含动力学的系统,不能默认任意构型两点间直线都可执行。Extend与CreatePath要使用合适运动模型或控制输入传播,检查朝向、转弯半径等;物理模拟可辅助,但模拟轨迹仍受模型正确性限制。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 路径规划
原书出处 · 1 处
- · 查看原书依据
Once the nearest vertex is found, the Extend function uses the max_dist parameter to limit the maximum edge length, replacing q_rand with a point q_new on the line connecting q_nearest and q_rand that is max_dist away from q_nearest. During this step, it is also a good time to take into account the specific kinematics of a robot and its motion capabilities. In the example of
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第13章《路径规划》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_13.xhtml)
- 结论依据:摘录中关于局部连接必须符合平台运动约束的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Once the nearest vertex is found, the Extend function uses the max_dist parameter to limit the maximum edge length, replacing q_rand with a point q_new on the line connecting q_nearest and q_rand that is max_dist away from q_nearest. During this step, it is also a good time to take into account the specific kinematics of a robot and its motion capabilities. In the example of