← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9125.a · 生成模型:GPT-6

二连杆末端要累加相对角

理解等级:中级

平面两转动关节且β相对第一连杆时,x=l1 cosα+l2 cos(α+β),y=l1 sinα+l2 sin(α+β),朝向θ=α+β。第二杆方向使用角度之和;若把β定义为绝对角,必须改模型而不能沿用同一公式。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      Similarly, the position of the end-effector P2 = (x2,y2) is given by For what concerns the orientation of the arm’s end-effector θ, we know it is just the sum of α + β. Altogether, the configuration r of the end-effector is given by The above equations represent the forward kinematic equations of the robot—as they relate its control parameters α and β (also known as

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于二连杆末端要累加相对角的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:Similarly, the position of the end-effector P2 = (x2,y2) is given by For what concerns the orientation of the arm’s end-effector θ, we know it is just the sum of α + β. Altogether, the configuration r of the end-effector is given by The above equations represent the forward kinematic equations of the robot—as they relate its control parameters α and β (also known as