← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9126 · 生成模型:GPT-6

DH坐标系遵循几何轴线

理解等级:中级

DH以关节转动或移动轴确定z方向,以相邻z轴公法线安排x轴,再用右手系确定y。坐标原点可以不在实体关节内部,只要几何关系正确;平行或共线轴存在选择自由,需整条链保持一致约定。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      In order to use the DH convention, we first need to define a coordinate system at each joint. With reference to figure 3.2, we choose the z-axis to be the axis of rotation for a revolute joint and the axis of translation for a prismatic joint. We can now find the common normal between the z-axes of two subsequent joints (i.e., a line that is

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于DH坐标系遵循几何轴线的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:In order to use the DH convention, we first need to define a coordinate system at each joint. With reference to figure 3.2, we choose the z-axis to be the axis of rotation for a revolute joint and the axis of translation for a prismatic joint. We can now find the common normal between the z-axes of two subsequent joints (i.e., a line that is