知识卡片
DH四参数分别沿指定轴
标准DH使用连杆长度a或r、公法线方向扭角α、沿前一z轴的偏移d,以及绕前一z轴的关节角θ。名称不足以决定正负与索引,参数表必须同坐标图配套;标准DH与改进DH的变换次序也不能混用。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 运动学
原书出处 · 1 处
- · 查看原书依据
1. The length r (sometimes, a is used) of the common normal between the z-axes of two joints i and i − 1 (link length). 2. The angle α between the z-axes of the two joints with respect to the common normal (link twist)—that is, the angle between the old and the new z-axis, measured about the common normal. 3. The distance d between the
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml)
- 结论依据:摘录中关于DH四参数分别沿指定轴的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:1. The length r (sometimes, a is used) of the common normal between the z-axes of two joints i and i − 1 (link length). 2. The angle α between the z-axes of the two joints with respect to the common normal (link twist)—that is, the angle between the old and the new z-axis, measured about the common normal. 3. The distance d between the