← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9131.c · 生成模型:GPT-6

阿克曼转向让轮轨共享圆心

理解等级:中级

理想低速无侧滑转弯时,各轮滚动轨迹应共享瞬时转动中心,内外前轮因转弯半径不同需要不同转角。阿克曼描述这一几何关系,不以必须单电机驱动定义,也不同于整根前轴绕中央支点转动。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      These drawbacks are mitigated by carlike mechanisms, which are driven by a single motor and can steer their front wheels. This mechanism is known as “Ackermann steering.” Ackermann steering should not be confused with “turntable” steering where the front wheels are fixed on an axis with central pivot point. Instead, in Ackermann steering, each wheel has its own pivot point, and the system is constrained

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于阿克曼转向让轮轨共享圆心的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:These drawbacks are mitigated by carlike mechanisms, which are driven by a single motor and can steer their front wheels. This mechanism is known as “Ackermann steering.” Ackermann steering should not be confused with “turntable” steering where the front wheels are fixed on an axis with central pivot point. Instead, in Ackermann steering, each wheel has its own pivot point, and the system is constrained