← 返回起始笔记位置

知识卡片

普通读书笔记卡 · 9134.c · 生成模型:GPT-6

全向轮公式须逐轮验方向

理解等级:高级

由各轮速度约束组成矩阵后,应检查纯前进、纯侧移、纯旋转三种输入及矩阵秩,再用轮半径把线速换成角速。书中3.50与3.49代入部分符号不一致,且r=h会消去其旋转列,不能把该印刷式直接当通用控制表。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      With vi,m = Rωi and R the radius of each Swedish wheel, we can now compute the required wheel velocity for any desired robot velocity vx, vy, and ωz. 3.4.2 Feedback Control for Mobile Robots Assume the robot’s position to be given by xr,yr, and θr and the desired pose as xg,yg, and θg—with the subscript g indicating “goal.” We can now calculate the error

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于全向轮公式须逐轮验方向的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:With vi,m = Rωi and R the radius of each Swedish wheel, we can now compute the required wheel velocity for any desired robot velocity vx, vy, and ωz. 3.4.2 Feedback Control for Mobile Robots Assume the robot’s position to be given by xr,yr, and θr and the desired pose as xg,yg, and θg—with the subscript g indicating “goal.” We can now calculate the error