← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9135.a · 生成模型:GPT-6

比例到点控制需要稳定性条件

理解等级:中级

用v=p1ρ、ω=p2α+p3η构造反馈提供一种转弯接近目标的思路,但增益符号、误差定义、初始朝向和零距离处理都会影响收敛。书中未给一般稳定性证明,不能声称任取三个比例系数都达到指定终态位姿。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      which will let the robot drive in a curve until it reaches the desired pose. 3.4.3 Under-Actuation and Over-Actuation As detailed at the beginning of this chapter, kinematics is concerned with analyzing the mapping between our control variables (i.e., the robot’s motors represented by the n DoFs in joint space) and their effect on the motion of the robot (our m DoFs in task/configuration space).

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第03章《运动学》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_3.xhtml) - 结论依据:摘录中关于比例到点控制需要稳定性条件的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:which will let the robot drive in a curve until it reaches the desired pose. 3.4.3 Under-Actuation and Over-Actuation As detailed at the beginning of this chapter, kinematics is concerned with analyzing the mapping between our control variables (i.e., the robot’s motors represented by the n DoFs in joint space) and their effect on the motion of the robot (our m DoFs in task/configuration space).