知识卡片
力椭球与速度椭球轴长互倒
在同一归一化关节预算、J满行秩等理想前提下,||τ||≤1与τ=JᵀF给出FᵀJJᵀF≤1,其主轴与速度椭球相同、半轴为对应非零奇异值的倒数。某方向速度能力强,所对应的力放大能力通常较弱。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 力
原书出处 · 1 处
- · 查看原书依据
This ellipsoid characterizes the forces at the end-effector that can be exerted by the robot on the environment in the given joint configuration q. It behaves similar to the velocity manipulability ellipsoid, with one important difference: While the principal axes of both ellipsoids are in the same orientation, their magnitude is in inverse proportions. As depicted in figure 4.1 (bottom), the major axis in force
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第04章《力》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_4.xhtml)
- 结论依据:摘录中关于力椭球与速度椭球轴长互倒的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:This ellipsoid characterizes the forces at the end-effector that can be exerted by the robot on the environment in the given joint configuration q. It behaves similar to the velocity manipulability ellipsoid, with one important difference: While the principal axes of both ellipsoids are in the same orientation, their magnitude is in inverse proportions. As depicted in figure 4.1 (bottom), the major axis in force