← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9139.c · 生成模型:GPT-6

力椭球秩亏时不再有界

理解等级:高级

当JJᵀ奇异,FᵀJJᵀF≤1可能沿其零空间不受这个理想力矩预算约束,不能继续当有界完整椭球求普通逆。真实承载仍受结构、摩擦和接触约束;几何模型中的无界方向不能解释为实际无限输出。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    • 主要讲解 · 力

    原书出处 · 1 处

    • · 查看原书依据

      which, thanks to equation (4.5), is mapped into a force manipulability ellipsoid: This ellipsoid characterizes the forces at the end-effector that can be exerted by the robot on the environment in the given joint configuration q. It behaves similar to the velocity manipulability ellipsoid, with one important difference: While the principal axes of both ellipsoids are in the same orientation, their magnitude is in inverse

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第04章《力》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_4.xhtml) - 结论依据:摘录中关于力椭球秩亏时不再有界的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:which, thanks to equation (4.5), is mapped into a force manipulability ellipsoid: This ellipsoid characterizes the forces at the end-effector that can be exerted by the robot on the environment in the given joint configuration q. It behaves similar to the velocity manipulability ellipsoid, with one important difference: While the principal axes of both ellipsoids are in the same orientation, their magnitude is in inverse