← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9142.a · 生成模型:GPT-6

平行夹爪的机体宽度也占空间

理解等级:中级

齿条、螺纹或其他导向机构把驱动转为相向平行运动,最大行程常同时增大本体尺寸。夹爪即使开口足够,也可能因本体过宽进不了狭窄区域;两倍开口宽只是某些布局的例子,需用实际机构包络核验。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      The left side of figure 5.5 shows a minimalist implementation of a parallel jaw gripper that can be actuated by a single servomotor, driving two rack gears to which the gripper jaws are mounted. While using gears on racks is unusual in an industrial design—the gripper jaws typically travel on threads actuated by worm gears or are attached to a pneumatic piston—figure 5.5 illustrates the

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第05章《抓取》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_5.xhtml) - 结论依据:摘录中关于平行夹爪的机体宽度也占空间的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:The left side of figure 5.5 shows a minimalist implementation of a parallel jaw gripper that can be actuated by a single servomotor, driving two rack gears to which the gripper jaws are mounted. While using gears on racks is unusual in an industrial design—the gripper jaws typically travel on threads actuated by worm gears or are attached to a pneumatic piston—figure 5.5 illustrates the