知识卡片
双指同步夹持需要对准或顺应
夹住固定物体时,耦合双指若一侧先碰撞,可能阻碍继续闭合并施加侧向载荷。可借更准确的物体位姿、腕力反馈、柔顺安装或独立指驱动来容纳偏差;所有物体并不都要求理想同时接触。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 抓取
原书出处 · 1 处
- · 查看原书依据
The control strategy for parallel jaw grippers requires an accurate pose estimation of the object of interest and precise positioning of the gripper so that the object is right in the center of the two jaws. Note that force closure with a static object, such as a screw mounted to a structure, requires both jaws to make contact with the object at the same time,
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第05章《抓取》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_5.xhtml)
- 结论依据:摘录中关于双指同步夹持需要对准或顺应的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:The control strategy for parallel jaw grippers requires an accurate pose estimation of the object of interest and precise positioning of the gripper so that the object is right in the center of the two jaws. Note that force closure with a static object, such as a screw mounted to a structure, requires both jaws to make contact with the object at the same time,