知识卡片
液压性能依赖整个回路
泵、阀、管路与液压执行器共同决定压力、流量和可用输出。含气体蓄能器的回路可以缓冲并突发释放能量,但不是所有液压系统都必须用加压气罐;带宽和反应速度取决于具体设计,不能一概断言永远慢于电机。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 执行器
原书出处 · 1 处
- · 查看原书依据
Hydraulic actuators require a tank with pressurized liquid and a compressor pump (which is again driven by a DC motor). The liquid is pressurized using a gas, and released into the actuators via solenoid valves. A second solenoid valve is used to let the liquid escape the actuator. The compressor is then pumping the liquid back into the tank. Here, the gas in the tank
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第06章《执行器》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_6.xhtml)
- 结论依据:摘录中关于液压性能依赖整个回路的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Hydraulic actuators require a tank with pressurized liquid and a compressor pump (which is again driven by a DC motor). The liquid is pressurized using a gas, and released into the actuators via solenoid valves. A second solenoid valve is used to let the liquid escape the actuator. The compressor is then pumping the liquid back into the tank. Here, the gas in the tank