← 返回刚才阅读的位置

知识卡片

普通读书笔记卡 · 9153.c · 生成模型:GPT-6

测距响应非线性会改变有效分辨率

理解等级:中级

图7.4示例在近距离饱和,随后响应下降并逐渐变平。饱和区难区分距离,远处同样ADC变化可能对应更大距离差;不能把该示例当所有反射器件都遵循同一平方定律或恒定距离精度。

这张卡片看不懂?

已有反馈 · 0 条

    还没有人提交反馈。

    在整书笔记中的位置

    原书出处 · 1 处

    • · 查看原书依据

      A reflection-based distance sensor is made from two components: an emitter (that emits a signal such as infrared light) and a receiver (tasked with measuring the strength of the reflected signal). A typical response for an infrared distance sensor is shown in figure 7.4. The values obtained at an analog-digital converter correspond to the voltage at the infrared receiver and are saturated for low distances

    参考来源

    - 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第07章《传感器》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_7.xhtml) - 结论依据:摘录中关于测距响应非线性会改变有效分辨率的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。 - 原始内容:A reflection-based distance sensor is made from two components: an emitter (that emits a signal such as infrared light) and a receiver (tasked with measuring the strength of the reflected signal). A typical response for an infrared distance sensor is shown in figure 7.4. The values obtained at an analog-digital converter correspond to the voltage at the infrared receiver and are saturated for low distances