知识卡片
路径规划先确定状态与约束
离散搜索和采样规划都要先确定状态、可行空间和边的有效性,随后才能比较路径成本。几何路径需要再考虑时间与动力学,单条碰撞检查不能保证整个执行轨迹可行。
结构图:
flowchart TD
B[机体与障碍] --> C[构型空间]
C --> F[可行状态与整边检查]
F --> D[离散图搜索]
F --> S[采样规划]
D --> P[候选路径]
S --> P
P --> T[时间化与执行约束]
T --> E[执行反馈与重规划]
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 路径规划
原书出处 · 1 处
- · 查看原书依据
Path planning allows autonomous mobile robots and manipulators to find a path to move between two points. A path is a set of poses from a start configuration to an end configuration that respects a set of specifications (e.g., avoiding obstacles for a mobile base or respecting a specific force profile at the end-effector of a manipulator). It differs from the concept of trajectory, which
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第13章《路径规划》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_13.xhtml)
- 结论依据:摘录中关于路径规划先确定状态与约束的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Path planning allows autonomous mobile robots and manipulators to find a path to move between two points. A path is a set of poses from a start configuration to an end configuration that respects a set of specifications (e.g., avoiding obstacles for a mobile base or respecting a specific force profile at the end-effector of a manipulator). It differs from the concept of trajectory, which