知识卡片
任务树与接触控制应分配时间尺度
行为树适合管理插装阶段、条件与失败分支,快速力控制通常由较高频底层循环承担。硬件可能只开放移动到力阈值等封装指令,控制架构应匹配可用接口;高层树并非天然不能高频,但不能阻塞底层实时反馈。
这张卡片看不懂?
这张卡片已通过人工审查,不再接受失败反馈。
已有反馈 · 0 条
还没有人提交反馈。
在整书笔记中的位置
- · 操纵
原书出处 · 1 处
- · 查看原书依据
Implementing peg-in-hole and hole-on-peg insertion also has a large number of possible failure modes, making a behavior tree (BT) architecture most suitable. However, force- and torque-based controls require operating at a higher bandwidth than a typical BT architecture would support—on the order of hundreds of hertz (Hz) and more. How to implement these closed-loop control loops is strongly dependent on the actual hardware. For example,
参考来源
- 位置:《Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)》第14章《操纵》(来源项目:a19c7933-4eda-4176-aebd-30fe7e1ad292;源文件:extracted/Introduction to Autonomous Robots Mechanisms, Sensors, Actuators, and Algorithms (Nikolaus Correll, Bradley Hayes etc.)/_epub-src/OEBPS/xhtml/chapter_14.xhtml)
- 结论依据:摘录中关于任务树与接触控制应分配时间尺度的定义、比较或条件支撑卡片;原书表述不严谨的范围已在覆盖记录逐项限定,不把案例结果外推为普遍结论。
- 原始内容:Implementing peg-in-hole and hole-on-peg insertion also has a large number of possible failure modes, making a behavior tree (BT) architecture most suitable. However, force- and torque-based controls require operating at a higher bandwidth than a typical BT architecture would support—on the order of hundreds of hertz (Hz) and more. How to implement these closed-loop control loops is strongly dependent on the actual hardware. For example,